Publicité
BCAUTION
Spilled brake fluid can damage painted surfaces
and plastic parts.
Be careful not to spill any fluid when filling
the brake fluid reservoir.
immediately.
Brake disc and brake pads
Essential in a brake disc checking: check the brake disc
thickness 1. If it is less than 3.5 mm, replace the brake
disc with a new one.
Essential in a brake pad checking: check whether the
brake pad has been worn to or beyond the limit line 2
and, if it has, replace the brake pads with new ones.
BWARNING
After a new brake disc or pads is installed, do not
ride immediately but grasp and release the brake
lever or the brake pedal several times to make
the brake discs and pads fully fit with each other,
restore to their normal holding forces and have the
brake fluid circulate stably.
Haojue DL160 99011H41110H000 V01 2023-8-26 08:25
Wipe spilled fluid up
53
Haojue DL160 99011H41110H000 V01 2023-8-26 08:25
BWARNING
After a new brake disc or pads is installed, the
braking distance may be a little longer than the
original value.
After the brake disc and brake
pads have realized full break-in following a mileage
of about 300 km, the best braking effect will be
realized. Make sure there is an enough braking
distance when riding before that.
BWARNING
Fail to check and maintain the brake pads or brake
disc, and replace them when recommended can
increase your chance of having an accident.
If you need to replace brake disc or brake pads,
have your Haojue dealer do these works. Check
and maintain the brake disc and brake pads as
recommended.
REAR BRAKE PEDAL ADJUSTMENT
The rear brake pedal position must be properly adjusted
at all times or the disk brake pads will rub against the
disk causing damage to the pads and to the disk surface.
Adjust the brake pedal position in the following manner:
(127)
EN
(127)
Publicité
