Publicité
STOPPING AND PARKING
Anti-lock brake system (ABS)
This model is equipped with an Antilock Brake System
(ABS) designed to help prevent wheel lock up during hard
braking or during braking on slippery surfaces while riding
in a straight line.
The ABS will operate whenever it senses that the wheels
are locking up. You may feel the brake lever and/or the
brake pedal pulsate lightly while the ABS is operating.
Even though ABS helps prevent wheel lock-up, you must
still be careful when braking in curves. Hard braking while
turning could cause wheel skidding and loss of control,
whether or not your motorcycle is equipped with ABS.
Having ABS does not mean you can take unnecessary
risks.
ABS will not compensate for poor judgment,
incorrect braking techniques, or not slowing down over
bad roads or in poor weather conditions.
You must still ride sensibly and alertly.
On regular paved roads, some riders may be able
to obtain slightly shorter stopping distances with
conventional brake systems than with ABS.
NOTE: In some situations, a motorcycle with ABS may
require a longer stopping distance to stop on loose or
uneven surfaces than an equivalent motorcycle without
ABS.
Haojue DL160 99011H41110H000 V01 2023-8-26 08:25
Inexperienced riders tend to under utilize the front
brake. This can cause excessive stopping distance
and lead to a collision. Using only the front or rear
brake can cause skidding and loss of control.
Apply both brakes evenly and at the same time.
Braking while turning the motorcycle can be
hazardous, whether or not your motorcycle is
equipped with ABS. ABS can not control wheel
side-slips that occur when you brake hard while
turning and the side-slips could cause loss of
control.
Slow down sufficiently in a straight line before you
begin to turn and avoid other than slight braking
while turning.
33
Haojue DL160 99011H41110H000 V01 2023-8-26 08:25
BWARNING
BWARNING
(107)
EN
(107)
Publicité
