Publicité
BWARNING
Do not flush the brake fluid reservoirs with
high-pressure water directly.
BWARNING
The use of any fluid except DOT3 and DOT4 brake
fluid from a sealed container can damage the brake
system and lead to an accident.
Use only DOT3 or DOT4 brake fluid from a sealed
container. Never use or mix with different types of
brake fluid.
BCAUTION
Spilled brake fluid can damage painted surfaces
and plastic parts.
Be careful not to spill any fluid when filling
the brake fluid reservoir.
immediately.
Brake disc and brake pads
Essential in a brake disc checking: check the brake disc
thickness 1. If it is less than 3.5 mm, replace the brake
Haojue DL160 99011H41110H000 V01 2023-8-26 08:25
Wipe spilled fluid up
51
Haojue DL160 99011H41110H000 V01 2023-8-26 08:25
disc with a new one.
Essential in a brake pad checking: check whether the
brake pad has been worn to or beyond the limit line 2
and, if it has, replace the brake pads with new ones.
BWARNING
After a new brake disc or pads is installed, do not
ride immediately but grasp and release the brake
lever or the brake pedal several times to make
the brake discs and pads fully fit with each other,
restore to their normal holding forces and have the
brake fluid circulate stably.
BWARNING
After a new brake disc or pads is installed, the
braking distance may be a little longer than the
original value.
After the brake disc and brake
pads have realized full break-in following a mileage
of about 300 km, the best braking effect will be
realized. Make sure there is an enough braking
distance when riding before that.
(125)
EN
(125)
Publicité
