Publicité
3. Slide harness straps
through the cover slots
and close fasteners.
4. For select covers only:
Attach elastic loops
around hooks at the back
of the head restraint.
5. If applicable, place the
infant insert pillow around
the buckle.
Installing the Anti-Rebound Bar Cover
1. Slide the cover on the black
portion of the anti-rebound
bar.
2. Attach the small elastic
loops to the plastic tabs.
3. Install the anti-rebound
bar. Insert the anti-rebound
bar into the two openings at
the front of the seat.
4. Attach elastic bands from
the cover to the hooks on the
shell.
5. Pull the anti-rebound bar to
ensure it is properly set.
49
Publicité
