Publicité
2. Unhook the top tether
hook from the back of the
child restraint and place it
up and over the seatback.
3. Recline child restraint to
the appropriate position.
Refer to page 15 to
determine appropriate
recline position.
4. Place the child restraint
FORWARD-facing on the
vehicle seat so that the
car seat base is flat on the
vehicle seat and is parallel
to vehicle seat.
5. Ensure that no more than
7.5 cm (3 in) of the base
hangs over the front edge
of the vehicle seat.
6. Open the CLICKTIGHT.
Squeeze the CLICKTIGHT
release buttons
underneath the front cover
flap and lift to open.
7. Route the vehicle lap-
shoulder belt through the
FORWARD-facing belt
path marked by green
labels.
8. Ensure the belt is not
twisted, then buckle the
vehicle seat belt.
9. Remove slack from the lap
part (A), then the shoulder
part (B) of the vehicle seat
belt.
10. Close the CLICKTIGHT
over the vehicle seat belt.
26
B
A
ADJUSTMENT
SLOT
CLICK
7.5 cm
Publicité
