Publicité
Removing the Foam from the Lower Infant Insert
The lower infant insert cover
can be cleaned by washing.
See page 50 for more
information. Remove foam from
insert before washing.
NOTE: The foam is not washable.
NOTE: When reinstalling the
foam, the red line of stitching
should face outward.
Removing the Anti-Rebound Cover
1. Open the CLICKTIGHT.
2. Unhook elastic bands from
the front of the seat.
3. Remove the anti-rebound bar.
Push the inner red button. Pull
the anti-rebound bar away on
one side. Repeat on the other
side.
4. Unhook the two small
elastic loops from the
plastic tabs.
5. Pull the cover away.
Installing the Cover
Installing the Side Protection Bottom Cover
1. Tuck the cover in by the
REAR-facing belt path.
46
PUSH
Publicité
