Publicité
Vehicle Headrest
In some cases, the vehicle headrest
can prevent the child restraint
headrest from being raised high
enough to properly adjust the harness
for the fit of your child when using a
FORWARD-facing reclined position.
DO NOT force the child restraint
headrest past the vehicle headrest.
Doing so could cause the child restraint not to perform
as intended. If the location of the vehicle headrest
interferes with the child restraint headrest, raise or
remove the vehicle headrest. If the vehicle headrest can
not be removed, move the child restraint to the upright
position or try a different seating location.
Incompatible Vehicle Seat Belts
The following types of vehicle seat belts are NOT compatible
with this child restraint. If any of the belt types listed below
are in the chosen seating position, choose another vehicle
seating position or check your vehicle owner's manual for
information on installing a car seat in your vehicle.
Lap belts with a sewn-in
latch plate that have a
retractor that locks only
in case of a sudden stop.
Lap-shoulder belts with
top or bottom anchor
points on the vehicle door.
NOTE: This Britax child restraint may not be
compatible with every inflatable lap-shoulder belt.
See FAQs in the support section of the Britax website
(us�britax�com/faqs) for additional instructions.
10
WARNING!
WARNING!
Lap belts forward of the
vehicle seat bight.
Motorized, automatic
vehicle seat belts.
Publicité
