Publicité
Installing the CLICKTIGHT Cover
1. Open the CLICKTIGHT
and slide the buckle
through the belly pad.
2. Route buckle through
the appropriate cover
and CLICKTIGHT slot.
Refer to Adjusting Buckle
Position page 12.
3. Pull cover over the front
edge of CLICKTIGHT.
4. Attach the elastic
bands to the hooks
on the bottom of the
CLICKTIGHT.
5. Close the CLICKTIGHT.
6. Route the bottom of the
harness through the slots
and reattach hook and
loop fasteners.
Installing the Headrest Cover
1. Raise the headrest to the
highest position. Tuck the
headrest cover under and
around the headrest foam.
2. Route the elastic strap
around headrest adjuster.
48
Publicité
