Publicité
Anti-Rebound Bar (ARB)
In the event of a crash, the anti-rebound bar is designed
to help prevent rebound rotation in rear-facing car seat
installations.
Installing the Anti-Rebound Bar
The anti-rebound bar is not intended for use as a carry
handle. Do not use the anti-rebound bar to carry this
child seat.
IMPORTANT:
facing.
IMPORTANT:
FORWARD-facing installation.
1. Open the CLICKTIGHT.
Squeeze the CLICKTIGHT
release buttons underneath
the front cover flap and lift to
open.
2. Insert the anti-rebound
bar into the two
openings at the front of
the seat.
3. Attach elastic bands
from the cover to the
hooks on the shell.
4. Pull the anti-rebound bar
away from child restraint
on both sides to confirm
connections.
Removing the Anti-Rebound Bar
1. Open the CLICKTIGHT.
2. Unhook elastic bands from
the front of the seat.
3. Push the inner red button.
Pull the anti-rebound bar
away on one side. Repeat
on the other side.
WARNING!
The anti-rebound bar MUST be used REAR-
The anti-rebound bar MUST be removed for
PUSH
17
Publicité
