Publicité
Les langues disponibles
Les langues disponibles
1 Quick Reference
Small Signal Programming Response
The following graphs show the output voltage and current programming response characteristic. The
voltage response applies with no load (open-circuit) conditions. The current response applies with ac
short-circuit conditions where the DUT is a low ac impedance. The characteristic is valid when
operating above 10% of the rated output of the unit.
For 20 kW and 30 kW Models
Programming Bandwidth Amplitude (& 1 kV, 2 kV, & 1.5 kV units)
Programming Bandwidth Phase (& 1 kV, 2 kV, & 1.5 kV units)
Voltage Programming Response (Comp 0-2)
Current Programming Response
54
Keysight RP7970 & RP7980 Series Operating and Service Guide
Publicité
