Publicité
Les langues disponibles
Les langues disponibles
1 Quick Reference
[:IMMediate]
[:AMPLitude] <value>
:NEGative
[:IMMediate]
[:AMPLitude] <value>
:MODE FIXed|STEP|LIST|ARB
:PROTection
:DELay
[:TIME] <value>
:STARt SCHange|CCTRans
:STATe 0|OFF|1|ON
:SLEW
[:IMMediate] <value>|INFinity
:MAXimum 0|OFF|1|ON
[SOURce:]
DIGital
:INPut
:DATA?
:OUTPut
:DATA <value>
:PIN<1-7>
:FUNCtion <function>
:POLarity POSitive|NEGative
:TOUTput
:BUS
[:ENABle] 0|OFF|1|ON
[SOURce:]
FUNCtion
CURRent|VOLTage
[SOURce:]
LIST
:COUNt <value>|INFinity
:CURRent
[:LEVel] <value>{,<value>}
:POINts?
:DWELl <value>{,<value>}
:POINts?
:STEP ONCE|AUTO
:TERMinate
:LAST 0|OFF|1|ON
:TOUTput
:BOSTep
30
Sets the current limit when in voltage priority mode.
Sets the current limit when in voltage priority mode.
Sets the transient mode.
Sets the over-current protection delay.
Specifies what starts the over-current protection delay timer.
Enables or disables the over-current protection.
Sets the current slew rate.
Enables or disables the maximum slew rate override.
Reads the state of the digital control port.
Sets the state of the digital control port.
Sets pin function. DIO|DINPut|FAULt|INHibit|ONCouple|OFFCouple |TOUTput|TINPut
Sets the pin polarity.
Enables or disables BUS triggers on digital port pins.
Sets the output regulation - voltage priority or current priority.
Sets the list repeat count.
Specifies the setting for each list step.
Returns the number of current points.
Specifies the dwell time for each list step.
Returns the number of dwell points.
Specifies trigger or dwell pacing.
Determines the output value when the list terminates.
Keysight RP7970 & RP7980 Series Operating and Service Guide
Publicité
