Keysight RP7970 Serie Manuel D'utilisation page 22

1 Quick Reference
Front Panel Menu Reference
Press the Menu key to access the front panel menus. For a brief tutorial, refer to
menu. If a menu item is grayed-out, it is not available for the mode that is being programmed.
Examples of modes that affect the menu items include Fixed, SAS, and Primary/Secondary functions.
1st Menu Level 2nd Level
Output Voltage
Current
Mode
SAS
Sequence
Advanced
Measure Sweep
Window
Control
AhWh
Transient Mode
Step
List
22
3rd & 4th Levels
Programs output voltage or voltage limit
Programs output current or current limit
Programs voltage or current priority mode and SAS operating mode
Curve Shape Specifies the curve shape: space or terrestrial
Settings Programs the SAS curve parameters: Imp, Isc, Vmp, and Voc
Table Activates one of the loaded tables
Scale Selects a scale factor for the current and voltage curves
Bandwidth Programs the SAS bandwidth
Delay Programs output on/off delay
Couple Configures output state coupling
Slew Current Programs output current slew rate
Voltage Programs output voltage slew rate
Resistance Programs output resistance
Bandwidth Current Programs current bandwidth
Voltage Programs voltage bandwidth
Tmode Programs output turn-on/turn-off modes
Configures measurement sampling
Select measurement window
Initiates, triggers, and aborts acquisitions; displays trig state
Measures or resets amp-hours and watt hours
Selects voltage and current transient modes
Configures voltage or current steps and trigger signals
Pace Specifies Dwell or Trigger paced list
Repeat Specifies number of list repetitions, or continuous list
Keysight RP7970 & RP7980 Series Operating and Service Guide
Using the front panel
Description