Publicité
Les langues disponibles
Les langues disponibles
5 SCPI Programming Reference
*TRG
Trigger command. Generates a trigger when the trigger subsystem has BUS selected as its source.
The command has the same effect as the Group Execute Trigger (<GET>) command.
Parameter
(none)
Generates an immediate trigger: *TRG
*TST?
Self-test query. Performs a instrument self-test. If self-test fails, one or more error messages will
provide additional information. Use SYSTem:ERRor? to read error queue. See
more information.
Parameter
(none)
Perform self-test: *TST?
The power-on self-test is the same self-test performed by *TST.
l
*TST? also forces an *RST command.
l
*WAI
Pauses additional command processing until all pending operations are complete. See
information.
Parameter
(none)
Wait until all pending operations complete. *WAI
*WAI can only be aborted by sending the instrument a Device Clear command.
l
198
Typical Return
(none)
Typical Return
0 (pass) or
+1 (failed)
Typical Return
(none)
Keysight RP7970 & RP7980 Series Operating and Service Guide
SCPI Error Messages
for
OPC
for more
Publicité
