Keysight RP7970 Serie Manuel D'utilisation page 31

[:DATA] <Bool>{,<Bool>}
:POINts?
:EOSTep
[:DATA] <Bool>{,<Bool>}
:POINts?
:VOLTage
[:LEVel] <value>{,<value>}
:POINts?
[SOURce:]
POWer
:LIMit? Returns the output power limit of the instrument
[SOURce:]
SASimulator
:ACTive
:MPP
:CURRent?
:POWer?
:VOLTage?
:BWIDth
:RANGe 0 | 1
:CURve
:IMP <value>
:ISC <value>
:SHAPe SPACe|TERRestrial
:VMP <value>
:VOC <value>
:MODE FIXed|CURVe|TABLe
:SCALe
:CURRent <value>
:VOLTage <value>
:TABLe
:ACTivate 1|2
:SELect 1|2
:UPDate 1|2
:TABLe[1|2]
:CURRent
[:AMPLitude] <value>{,<value>}
:POINts?
:VOLTage
[:AMPLitude] <value>{,<value>}
:POINts?
Keysight RP7970 & RP7980 Series Operating and Service Guide
Generates a trigger out at the Beginning Of STep
Returns the number of BOST points.
Generates a trigger out at the End Of STep
Returns the number of EOST points.
Specifies the setting for each list step.
Returns the number of voltage points.
Returns the current at the maximum power point.
Returns the maximum power point.
Returns the voltage at the maximum power point.
Sets the SAS compensation.
Sets the current at the maximum power point of the curve.
Sets the short-circuit current.
Sets the curve shape.
Sets the voltage at the maximum power point of the curve.
Sets the open-circuit voltage.
Sets the operating mode of the instrument.
Sets a scale factor for the curve in both SAS and Table modes.
Sets a scale factor for the curve in both SAS and Table modes.
Loads and runs the table created using the MEMory commands.
Runs one of two tables that have been loaded.
Updates a table.
Programs a list of current points in Table mode.
Returns the number of current points in the current table.
Programs a list of voltage points in Table mode.
Returns the number of current points in the voltage table.
1 Quick Reference
31