Publicité
Les langues disponibles
Les langues disponibles
[SOURce:]SASimulator:CURVe:ISC <current>|MIN|MAX
[SOURce:]SASimulator:CURVe:ISC? [MIN|MAX]
This command sets the short-circuit current when operating in Curve mode. The value is in amperes.
Parameter
0 to 102% of rating | MIN | MAX; *RST: 1% of rating
Sets the short-circuit current: SAS:CURV:ISC 12
This sets all four parameters at once: SAS:CURV:IMP 10; ISC 12; VMP 100; VOC 120
[SOURce:]SASimulator:CURVe:SHAPe <shape>
[SOURce:]SASimulator:CURVe:SHAPe?
This command sets the curve shape when operating in Curve mode.
SPACe sets the curve shape according to the
TERRestrial sets the curve shape according to the
Parameter
SPACe|TERRestrial, *RST: SPACe
Sets the curve shape to TERRestrial: SAS:CURV:SHAP TERR
[SOURce:]SASimulator:CURVe:VMP <voltage>|MIN|MAX
[SOURce:]SASimulator:CURVe:VMP? [MIN|MAX]
This command sets the voltage at the maximum power point of the SAS curve when operating in Curve
mode. The value is in volts.
Parameter
0 to 102% of rating | MIN | MAX; *RST: 0.8% of rating
Sets the voltage of the maximum power point: SAS:CURV:VMP 100
This sets all four parameters at once: SAS:CURV:IMP 10; ISC 12; VMP 100; VOC 120
[SOURce:]SASimulator:CURVe:VOC <voltage>|MIN|MAX
[SOURce:]SASimulator:CURVe:VOC? [MIN|MAX]
This command sets the open-circuit voltage when operating in Curve mode. The value is in volts.
Parameter
0 to 102% of rating | MIN | MAX; *RST: 1% of rating
Sets the open-circuit voltage: SAS:CURV:VOC 120
This sets all four parameters at once: SAS:CURV:IMP 10; ISC 12; VMP 100; VOC 120
Keysight RP7970 & RP7980 Series Operating and Service Guide
Typical Return
<Isc setting>
space
equations.
terrestrial
equations.
Typical Return
SPAC or TERR
Typical Return
<Vmp setting>
Typical Return
<Voc setting>
5 SCPI Programming Reference
215
Publicité
