Publicité
Les langues disponibles
Les langues disponibles
Command Quick Reference
Some [optional] commands have been included for clarity. All settings commands have a
corresponding query. See the
ABORT
:ACQuire
Cancels any triggered measurements.
:ELOG
Stops external data logging.
:TRANsient
Cancels any transients or Arbs.
CALibrate
:COUNt?
:CURRent
[:LEVel] <value>
:TC
:DATA <value>
:DATE <"date">
:LEVel P1|P2|P3
:PASSword <value>
:SAVE
:STATe 0|OFF|1|ON
:VOLTage
[:LEVel] <value>
DISPlay
[:WINDow]
[:STATe] 0|OFF|1|ON
:VIEW METER_VI|METER_VP|METER_VIP
:SAVer
[:STATe] 0|OFF|1|ON
FETCh
[:SCALar]
:CURRent
[:DC]? [<start_index>, <points>]
:ACDC?
:HIGH?
:LOW?
:MAXimum?
:MINimum?
:POWer
[:DC]?
:MAXimum?
:MINimum?
Keysight RP7970 & RP7980 Series Operating and Service Guide
Syntax Conventions
for SCPI.
Returns the number of times the unit has been calibrated.
Calibrates the current programming and measurement.
Calibrates the temperature coefficient.
Enters the calibration value read by the external meter.
Enters the calibration date in nonvolatile memory.
Advances to the next level in the calibration.
Sets a numeric password to prevent unauthorized calibration.
Saves the calibration constants in non-volatile memory.
Enables or disables calibration mode.
Calibrates the local voltage programming and measurement.
Turns the front panel display on or off.
Selects the parameters to display on the front panel.
Turns the front panel screen saver on or off.
Returns the averaged measurement.
Returns the rms measurement (ac + dc).
Returns the High level of a pulse waveform.
Returns the Low level of a pulse waveform.
Returns the maximum value
Returns the minimum value
Returns the averaged measurement.
Returns the maximum value
Returns the minimum value
1 Quick Reference
25
Publicité
