Publicité
Les langues disponibles
Les langues disponibles
System features
Save and recall up to 10 instrument states in non-volatile memory
l
GPIB (IEEE-488), LAN, and USB remote programming interfaces are built in
l
Front panel menu setup for GPIB and LAN parameters
l
Compliant with 1.5 LXI Device Specification 2016, including a built-in Web server
l
SCPI (Standard Commands for Programmable Instruments) compatibility
l
Primary/secondary function allows for composite output control and display from one unit
l
Regenerative Operation
Whenever the RPS is sinking current, either by rapidly down-programming the output, or by
discharging an energy source such as a battery, the unit will direct the excess power back to the ac
mains. You cannot disable the regenerative operation.
During regenerative operation, the power factor of 0.99 is maintained. Sine wave current distortion is
less than 2% at full load. This ensures the quality of the ac signal that is returned to the ac mains.
When an ac mains dropout is sensed, galvanic relays disconnect the ac mains and the unit shuts down.
To safeguard your device under test, the RPS provides "anti-islanding" that senses that the grid is live
before regenerating power back to the grid.
Refer to
AC Mains Considerations
Front Panel at a Glance
Keysight RP7970 & RP7980 Series Operating and Service Guide
for additional information about unit shutdown and restart.
1 Quick Reference
17
Publicité
