Maintenance - Mondolfo Ferro TBE160 TERRA Manuel D'utilisation

MAINTENANCE

WARNING
The manufacturer declines all responsi-
bility for claims resulting from the use of
non-original spare parts or accessories.
WARNING
Unplug the machine from the socket and
make sure that all moving parts have
been locked before making any adjust-
ments or maintenance work.
WARNING
Do not remove or modify any part of this
machine (except for assistance).
WARNING
Before removing unions or pipes, make
sure that the fluids are not pressurised.
If pressurised oil escapes, it can cause
serious injury.
WARNING
Keep the working area clean.
Never use compressed air or water jets
to remove dirt or residues from the
machine.
When cleaning, take care not to create
and raise dust as far as possible.
To make your machine last longer and
perform better, it is recommended to:
- clean the turntable and the guide pins
once a week with environmentally
friendly solvents;
- grease (Fig. 39 a-b-c-d-e-f) all of the
machine's moving parts at least once a
month;
- clean the filter cartridge approx. every
1500 hours of operation;
- check the oil level in the control unit
(see the lubrication and greasing dia-
gram) (B, Fig. 16) and top up with oil if
necessary, API CIS 32 / AGIP OSO 32 or
80 - E - Operator's manual
nGlISH
Fig. 39a
Fig. 39b
Fig. 39c
Fig. 39d