Publicité
Les langues disponibles
Les langues disponibles
Housing
Data
Design:
Approx. weight:
Type of protection (according to DIN 40050):
Safety class:
Housing feedthroughs (5 threaded unions):
Measuring cell
Data
Oval calotte, streamlined shape with measuring channel
diameter
Material: polyether ether ketone
(with BGA and FDA approval)
Material: Polypropylene
Dimensions (D x H):
Pressure resistance at 20 °C
(see also pressure/temperature curve):
Temperature resistance, short-term max. (PEEK):
Temperature resistance, short-term max. (PP):
Chemical resistance:
Resistant to inorganic acids and alkalis, as well as additives in
the range of application concentrations from
Temperature sensor:
NTC resistor in stainless steel thermowell
Response time of (90% value), approx.
Material of the temperature sensor in the measuring cell:
Sealing element (O-ring):
Connector line length:
(Can be extended to max. 20 m using 3 m, 6 m and 20 m
extension cables)
Type of cable:
Special measuring cable with M12 round plug
Measuring cable connection:
- Fixed connection on the sensor side
- Pluggable on the device side with 7-pole M12 round plug
Conductivity measurement
Data
Measuring principle: Induction method
Measuring frequency approx.:
Conductivity indicator:
Display with floating decimal point mS/cm indicator
Wall-mounted unit
75
Technical data
Value Unit
3 kg
65 IP
1
M16x1.5
Value Unit
8 mm
PEEK
PP
39 x 50 mm
PN = 10 bar
130 °C
90 °C
0 ... 3 % by weight
R25 = 214 kW
30 s
1.4571
EPDM
0,2 m
7 -pole
Value Unit
10 kHz
MAN049432 Rev. 03-03.2024
Publicité
