Publicité
Les langues disponibles
Les langues disponibles
Installation and start-up
7.2
Set-up
The following settings can be made in the Setup menu:
n
Operating mode
n
Conductivity/concentration
n
Product name
Current allocation for conductivity
n
n
Current allocation for temperature
Invert setpoints
n
n
Configuration of pre-proportioning
n
Recording interval for operating data
n
Date/time/automatic daylight saving time
Starting point: 'Options' screen (12)
1.
Press
ð The 'Operating Mode' screen (20) appears.
The unit offers the option of selecting between 'AS' mode (make-up mode;
factory set) and 'CIP' mode (phase separation).
The special CIP phase separation application performs a precise concentration
measurement of alkaline or acidic cleaning and disinfecting solutions. For an
overview of the changes compared to 'AS' mode
description' on page 23 .
2.
If necessary, use
your selection with
ð Mode selected.
After selecting the mode, the second screen of the 'Setup' submenu appears:
MAN049432 Rev. 03-03.2024
Ä Chapter 7.1 'Initial start-up' on page 43
to activate the 'Setup' menu.
and
and confirm the change with
Ä Chapter 4 'Function
to choose between
.
44
and 'CIP' , confirm
Publicité
