Publicité
Les langues disponibles
Les langues disponibles
Installation and start-up
n
Alarm delay if the minimum temperature is not reached (63)
minimum temperature is not reached' on page 56
n
Alarm repeat time (64)
To switch between the individual submenus, press
Maximum proportioning time exceeded
Starting point: 'Settings' screen (13)
1.
Select 'Alarm Settings '
2.
Press
ð The 'Maximum Proportioning Time Exceeded' screen appears
3.
Set the delay in seconds using
4.
Confirm the settings with
ð Proportioning timeout set.
MAN049432 Rev. 03-03.2024
Ä 'Alarm repeat time' on page 57
(60) and confirm with
until the 'Maximum Proportioning Time Exceeded' screen (61) appears.
.
repeatedly.
Ä Chapter 7.1 'Initial start-up' on page 43
.
,
and .
54
Ä 'Alarm delay if the
Publicité
