Import product data
An Excel spreadsheet in .csv file format can be created and edited for the import of
product data. This file must be stored on a USB stick located in the USB port of the
LMI03.
The product data is saved as ASCII in a .csv file.
The file is formatted as follows:
#LMIT09:P
[product name]
[value count]
[reference temperature]
[tk_alpha]
[concentration];[conductivity]
....
#END
Legend
[product name]: Max. 19 letters
[value count]: 4 ... 10
[reference temperature]: 0 ... 55
[tk_alpha] 0.00 ... 5.00
[concentration]: 0.00 ... 9.99
[conductivity]: 0.00 ... 499.99
The corresponding values must be entered between the square brackets
without any additional characters or terms.
USB stick inserted in the LMI03
Starting point: 'USB Import' screen (81)
1.
Select 'Import Product Data1'
2.
Select the required product data using
ð The 'Import Product Data' loading screen appears.
Ä Chapter 7.1 'Initial start-up' on page 43
è
(85) and confirm with
,
and .
63
Operation
.
MAN049432 Rev. 03-03.2024