Ecolab LMI03 Manuel D'utilisation page 131

ð 'Invert Setpoints' (26) appears.
12. Set the inversion using ,
ð Setpoint inversion is set.
Configuration of pre-proportioning
13.
The Configuration of Pre-proportioning menu item appears only when AS
operating mode is selected.
Press .
ð 'Configuration of Pre-proportioning' (27) appears.
14. Set the pre-proportioning using ,
ð Pre-proportioning is set.
Recording interval for operating data
15. Press .
ð 'Recording Interval for Operating Data' (28) appears.
Installation and start-up
and , and confirm with
and , and confirm with
47
.
.
MAN049432 Rev. 03-03.2024