Publicité
Les langues disponibles
Les langues disponibles
Installation and start-up
Temperature compensation
The conductivity changes depending on the temperature of the solution to be determined.
A temperature sensor installed in the measuring cell compensates for the influence of
temperature on the measurement result.
Starting point: 'Settings' screen (13)
1.
Select 'Conductivity Measuring Cell'
2.
Press
3.
Set the temperature compensation using
4.
Confirm the settings with
ð Temperature compensation is set.
MAN049432 Rev. 03-03.2024
until the 'Temperature Compensation' screen (41) appears.
.
Ä Chapter 7.1 'Initial start-up' on page 43
(40) and confirm with
, .
50
.
Publicité
