Operation
8.3
Manual operation
The 'Manual Operation' menu can be used to switch the manual outputs of the LMI03 on
and off manually.
The following options are available:
- Outputs
- Pre-proportioning
- Alarm
Starting point: 'Options' screen (12)
1.
Select 'Manual Mode'
2.
Use
to select the desired output,
and press
ð The corresponding output is switched on.
MAN049432 Rev. 03-03.2024
Ä Chapter 7.1 'Initial start-up' on page 43
and confirm with
to confirm.
To switch off the output, confirm it again with
68
.
or
to activate the desired output
.