Publicité
Les langues disponibles
Les langues disponibles
Installation and start-up
Pre-proportioning delay time and proportioning time
Setting of delay time and proportioning time for pre-proportioning using relay outputs.
Starting point: 'Settings' screen (13)
1.
Select 'Controller Settings for Setpoints 1 and 2' (50) and confirm with
2.
Press
appears.
3.
Set pre-proportioning delay time and proportioning time via ,
4.
Confirm the settings with
ð Pre-proportioning delay time and proportioning time are set.
MAN049432 Rev. 03-03.2024
until the 'Pre-proportioning Delay Time and Proportioning Time' screen (51)
.
Ä Chapter 7.1 'Initial start-up' on page 43
52
.
and
.
Publicité
