multipiezo
11.1
Electromagnetic Compatibility IEC/EN 60601-1-2
WARNING: Contraindications.
Interference with other equipment
Even if compliant with standard IEC/
EN 60601-1-2, multipiezo may interfere
with other devices in the vicinity. multipiezo
must not be used near or stacked with
other appliances. Install multipiezo far from
subsistence equipment. However, if this
is necessary, the correct operation of the
equipment in that configuration, and of all
equipment, must be checked and monitored
before starting the intervention.
WARNING: Portable and mobile radio
communication equipment may influence the
correct operation of the appliance.
11.2
Guide and Manufacturer's Declaration -
Electromagnetic Emissions
multipiezo is designed to operate in the electromagnetic environment specified below.
The purchaser or user of multipiezo should ensure that it is used in such an environment.
Emissions Test
RF Emissions
CISPR 11
RF Emissions
CISPR 11
Harmonic emissions
IEC 61000-3-2
Emissions of fluctuations
voltage/flicker
IEC 61000-3-3
58
Interference from other equipment
An electrosurgical scalpel or other
electrosurgical units positioned near the
multipiezo appliance may interfere with the
correct operation of the appliance itself.
particular EMC precautions and must be
installed and put into service according to the
EMC information provided in this chapter.
accessories not supplied by MECTRON may
adversely affect the EMC performances.
Compliance
Electromagnetic Environment Guidance
multipiezo uses RF energy only for its internal
operation. Therefore, its RF emissions are
Group 1
very low and probably do not cause any
interference with nearby electronic devices.
Class B
multipiezo is suitable for use in all buildings,
including domestic buildings, and those
Class A
directly connected to the public low-
voltage power supply network that supplies
buildings used for domestic purposes.
Compliant
WARNING: Contraindications.
WARNING: The appliance requires
WARNING: The use of cables and