Publicité
Les langues disponibles
Les langues disponibles
multipiezo
2.2
Handpiece Identification Data
On the scaler handpiece are lasermarked
the traceability data, UDI code included.
NOTE: The complete list of symbols and
their description is provided in
1.5 on page 6.
2.3
Inserts Identification Data
Each insert is laser-marked with the
traceability data. Their packaging
contains traceability data including the
UDI code.
3
DELIVERY
3.1
List of Components
See the Figure on the inside cover.
multipiezo includes a basic equipment and
a set of accessories that can be ordered
separately,
variable
configuration and customer requests (see
Table on page 9).
NOTE: Both the items included in the
standard supply and all accessories can be
ordered separately by the client.
Refer to the MECTRON website, or your
local retailer, for the list of available and
compatible accessories
The packaging of the appliance cannot
undergo strong impacts as contains electronic
8
Chapter
in
relation
to
the
114000000
03120238
0051
0476
YYYY-MM
MANIPOLO ABLATORE
SLIM
components, therefore the transport and the
storage must be carried out with particular
care. Do not stack various boxes in order to
avoid pinching the underlying packaging.
All the material sent by MECTRON was
controlled at the time of dispatch.
The
appliance
is
shipped
protected and packaged.
Upon receipt of the appliance, check for any
possible damage caused during transport and
in case any damage and/or defects is found,
complain to the transporter.
Keep the packaging in case any items need to
be sent to an Authorised MECTRON Service
Centre and to store the appliance during long
periods of non-use.
MANIPOLO ABLATORE
SLIM
114000000
03120000
MANIPOLO ABLATORE
SLIM
107000000
03120238
MANIPOLO ABLATORE
SLIM
114000000
Data Matrix
HIBC 128
03120238
appropriately
Publicité
