multipiezo
The possibility to choose the irrigation
flow rate is linked to the selected function,
as follows:
• ENDO: 6 flow rate levels: from 1 to
6. Irrigation can be set to 0;
• PERIO/SCALER: 6 flow rate levels:
from 1 to 6. Irrigation can be set
to 0;
• RESTORATIVE: 6 flow rate levels:
from 1 to 6. Irrigation can be
set to 0 only with powers 1 to 5.
For RESTORATIVE power level 6,
irrigation is necessary.
SYMBOLS
(Ref. 7 inside cover)
multipiezo is provided with a diagnostic
circuit that allows the detection of
malfunctions and viewing of their type
on the touch keyboard by means of a
symbol.
To help the user identifying the part that
is non-functioning there are four symbols
described in
Chapter 12.1 on page 65
5.3
Safety Requirements Before and During Use
WARNING: Before starting work always
ensure that you have all replacement parts
(handpiece, inserts, keys) to use should there
be downtime due to a fault or problem.
WARNING: Exclusively use original
Mectron inserts, accessories and
replacement parts.
WARNING: Use of non-original
inserts not produced by MECTRON: this
entails permanent damage to the thread
of the handpiece and compromises correct
operation with the risk of causing harm to the
patient.
CAUTION: Contraindications -
Ultrasonic Scaler. Do not perform treatments
on metal or ceramic prosthetics. Ultrasonic
vibrations could lead to decementation of the
dentures.
18
.
WARNING: Contraindications. Do not
use multipiezo on patients with Pacemakers
or other implantable electronic devices. This
regulation also stands for the operator.
WARNING: Do not perform scaling
treatments without water spray in order
to avoid an overheating of the insert that
can cause damage to the tooth. Treatments
without water spray can only be those
performed with the "Dry Work" inserts
without water passage.
CAUTION: In treatments requiring
irrigation, use only inserts with a liquid
passage.
perio/scaler
perio/scaler
restorative
restorative
perio/scaler
perio/scaler
restorative
restorative