Publicité
Les langues disponibles
Les langues disponibles
multipiezo
Check that the small tube inside the cap
is properly installed, then screw the cap
onto the tank;
CAUTION: Check that the female
coupling of the tank cap is clean and
free from obstructions.
CAUTION: Check that the male
coupling on the appliance core unit is
clean and that its O-rings are not worn.
CAUTION: Use the support only
to install the Mectron 500 ml tank and
to stow the handpiece. Do not use the
support for other purposes.
Holding the tank in a vertical position,
insert it on the machine core unit of the
device until it comes into contact;
CAUTION: Do not overturn the tank,
the cap is not watertight. The outflow
of physiological solution or aggressive
liquids may cause damage to the
surfaces.
Correctly insert the scaler handpiece
onto its cord by matching the alignment
notch on the handpiece connector with
the alignment key on the cord connector.
Check that the electrical contacts of both
are perfectly dry and if necessary dry
them by blowing with compressed air;
12
4
5
6
Publicité
