SOLIS EASYVAC PLUS Mode D'emploi page 96

8. VACUUMING SOLIS CONTAINERS WITH LIDS
Caution: Please exclusively use containers from SOLIS with this appliance.
For item numbers and descriptions, please refer to the enclosed order form.
You can find accessories for you vacuum-appliance in good stores or you get them
from SOLIS-Mail AG.
telephone: 0848 804 884, telefax: 0848 804 890, email: info@solis-onlineshop.ch
or www.solis-onlineshop.ch
Only these containers are designed for the vacuum that the SOLIS EasyVac Plus creates.
A. Vacuuming of SOLIS containers with twist-knob
on the lid (fig. M)
– Wash the container in water and clean the lid with a
damp cloth; dry all completely.
– Place the food into the container and leave at least
3 cm room between the food and the top edge of
the container (see fig. N). Clean the top edge of the
container again and the underside of the lid and the
seal of the container lid, then place the container lid
on the container. Turn the control dial on the lid to
the "SEAL" position (see fig. M).
Take the air extraction hose (15) and insert the
–
end of it into the air extraction opening (3) of the
appliance and the other end into the opening of the
twist-knob on the lid (see fig. O+p).
– Close the appliance lid.
– Press the Canister (F) button (see fig. p), the vacuum
process begins. To make sure that no air can enter
between the container and the lid, press down on the
lid with your hand during vacuuming. The appliance
switches off automatically once the required vacuum
has been reached.
– Gently pull out the air extraction hose from the lid.
– To open the lid of the container, turn the control dial
to the "OpEN" position. You will hear a slight hissing
sound as the air enters the container again. This hiss
guarantees that there was an air vacuum in the con-
tainer.
96
M
N
O
15
3
P