SOLIS EASYVAC PLUS Mode D'emploi page 93

– Close the cover and press it down both hands on each
side, until you hear a "click" at both sides. Now the
cover is locked in at both sides (see fig. E)
– Press the Manual Seal (H) button to start the sealing
program (see fig. F). The blue indicator light illumi-
nates. As soon as the sealing process is complete, the
light goes out.
– Press on both release buttons (2) to open the lid
(see fig. G).
– Open up the lid and remove the bag.
– Check that the seal is straight and does not have any
folds (see fig. H). If this is not the case, repeat the
process.
E
F
G
H
93