VHF S2 Mode D'emploi D'origine page 8

General safety messages: Safety messages
2.2
DANGER
DANGER
WARNING
WARNING
8
Safety messages
Use of damaged cables
Danger to life due to an electric shock!
Disconnect the machine from any electrical source and prevent the
h
machine from being restarted.
Contact the service department.
h
h Replace damaged cables only with original spare parts.
Troubleshooting while the machine is running
Danger to life due to an electric shock!
Consult the service department, before you clear the malfunction on
h
your own.
Disconnect the machine from any electrical source and prevent the
h
machine from being restarted.
Operation of the machine in service mode with open working
chamber door
Risk of injury through cuts and bruises! Hazards through ejected
chips!
h Operate the machine in "User" mode only unless you have been
authorized by vhf to use other modes.
h Even if you are an authorized user, use the "Service Modes" only when
necessary.
While in any "Service Mode": Do not reach into the working chamber
h
while the axes are moving or during machining.
While in any "Service Mode": Everyone within reach of the machine
h
must wear protective eye wear.
Processing harmful material
Respiratory diseases due to inhalation of harmful materials!
Process material only when the air extraction is running.
h
Only use suited materials, that are harmless when the air extraction is
h
working.
Use a vacuum cleaner with an extra-fine particle filter.
h
Original Instructions: S2 Impression
Document version: F – 07/2019