VHF S2 Mode D'emploi D'origine page 39

6.7
6.8
Task
Cleaning the
working cham-
ber
Collet chuck Once a week, if nec-
cleaning
Cleaning the
housing
Calibration of
the machine
Changing the
filter cartridge of
the service unit
Inspection by
service techni-
cian
* These are recommendations as a guidance. Depending on the processing material and how well the
machine is cleaned these values can differ.
Definition of wear parts
The machine and the extra equipment are warranted for a period of 24
months or 2000 operating hours, whatever comes first. The warranty covers
defects in materials or fabrication as long as the regulations for using the ma-
chine in all documents are followed.
Of course, the warranty also covers wear parts as long as their failure cannot
be attributed to the function-related abrasion. The wear parts that are men-
tioned below can already wear down within the warranty period due to their
normal function. The average useful life of the wear parts can be seen in the
following table. Use these values to determine operating costs, to plan your
spare part stock as well as to create individual maintenance and service plans.
Maintenance table
Recommended
interval
Once per day, if
necessary more
often
essary more often
As necessary
Only if necessary
(chapter 6.6)
With visible pol-
lution or every 2
years*
After 2000 op-
erating hours*
or every 2 years*
(chapter 6.9)
Original Instructions: S2 Impression
Document version: F – 07/2019
Maintenance and cleaning: Definition of wear parts
Procedure/Utensils
Cleaning with vacuum
cleaner and brush
(chapter 6.1)
Spindle service set
(chapter 6.2)
Cloth and possibly deter-
gents (chapter 6.3)
CNC Software
(see software manual)
Check compressed air
supply
(chapter 6.5)
–
Illustration spare part
–
–
–
–
39