VHF S2 Mode D'emploi D'origine page 17

Further scope of delivery (not pictured):
CNC milling machine S2 Impression
„ „
manual S2 Impression
„ „
software manual
„ „
software license DentalCAM including control software. Please ask your
„ „
reseller regularly, if new updates are available and update your software.
„
b
If you are using an external CAM software only the control software DentalCNC
is included in the scope of delivery.
3.6 Sound emission
„
b
The sound emission varies heavily depending on the manufacturing material
and the operating conditions. Change the milling conditions if the machine
is too loud. Ensure that the blanks are fixed properly, the condition of the tool
and check the material you use.
Wear ear protection during processing, if loud noises can't be avoided.
Measuring conditions:
processed material: CoCr
„ „
tool worn out
„ „
measuring distance to sound source 1 m
„ „
air extraction activated
„ „
measurement according to ISO 3746, engineering method 3
„ „
(measuring conditions see above)
all other operating conditions (tool
change, movement of the axes etc.)
Original Instructions: S2 Impression
Operating condition
processing
Document version: F – 07/2019
General information: Sound emission
Maximum A-weighted
sound pressure level
77 dB(A)
<70 dB(A)
17