VHF S2 Mode D'emploi D'origine page 36

Maintenance and cleaning: External cleaning (housing)
6.3
Important
HInt
36
M 11. Remove the measuring pin from the collet chuck and store it together
with the other components of the spindle service set.
M 12. Close the working chamber door.
External cleaning (housing)
The cleaning of powder-coated surfaces should generally be done with a soft
dry cloth first. If pollution cannot be removed this way, the cloth can be mois-
tened and a pH-adjusted cleaner can be used if necessary.
Basically any contact between the powder coatings and alkaline or acid sub-
stances has to be avoided. Especially metallic powders show a high sensitive
reaction. Please take special care of the affixed machine labels, so that you
don't remove them while cleaning the housing. They are highly sensitive to
rubbing and strong detergents.
If the usage of a special cleaner is necessary to eliminate certain pollutions
we recommend to check the applicability of the cleaner at a hidden place of
the housing first.
Original Instructions: S2 Impression
Document version: F – 07/2019