VHF S2 Mode D'emploi D'origine page 31

Illustration 9:
HInt
NOTICE
Illustration 10:
M 3. Lead the key for the emergency release of the working chamber door
through the opening to the right of the blank changer LED (see Illus-
tration 9).
Opening of the emergency release
M 4. Deactivate the safety interlock of the working chamber door by turn-
ing the key counter-clockwise until the end position.
The working chamber door can be opened.
–
M 5. Open the working chamber door.
M 6. Open the gripper (see Illustration 11 on page 33) and take out the
blank frame, if it is not locked in the blank holder.
M 7. Close the gripper.
If you don't reach the gripper, push the release carriage to the blank maga-
zine until you reach the gripper.
Push the gripper only against the left stop when the gripper is closed to
protect the machine from getting damaged (see Illustration 11 on page
33)!
M 8. Hold the cover plate up with one hand and push the release carriage
to the blank magazine until the end position with the other hand (see
Illustration 10).
Release carriage in working chamber
Original Instructions: S2 Impression
Document version: F – 07/2019
Running the machine: Procedure after a power failure
31