Publicité
Les langues disponibles
Les langues disponibles
Software operation
7.2.5
Visual signal
Switching on and off
7.2.6
Automatic unlocking of the lid
30 / 39
The indicator backlight flashes as a visual signal after the centrifugation run
is finished.
1.
Press and hold the
'*MACHINE MENU*' is displayed after 8 seconds.
��
[SELECT] button repeatedly until '-> Settings' is displayed.
2.
Press the
[START/PULSE] button.
3.
Press the
'End beep = on' or 'End beep = off' is displayed.
��
[SELECT] button repeatedly until 'End blinking=off' or 'End
4.
Press the
blinking =on' is displayed.
[t] buttons to set 'off' or 'on' .
5.
Use the
off: Backlight does not flash.
on: Backlight flashes.
[START/PULSE] button.
6.
Press the
�� The setting is stored.
'Store Settings...' is displayed briefly.
'-> Settings' is then displayed.
[STOP/OPEN] button once to exit the '-> Settings' menu
7.
Press the
or
[STOP/OPEN] button twice to exit the '*MACHINE MENU*' .
Press the
Setting whether or not the lid unlocks automatically after the centrifugation
run.
The rotor is stationary.
1.
Press and hold the
'*MACHINE MENU*' is displayed after 8 seconds.
��
[SELECT] button repeatedly until '-> Settings' is displayed.
2.
Press the
[START/PULSE] button.
3.
Press the
'End beep = on' or 'End beep = off' is displayed.
��
4.
Press the
[SELECT] button repeatedly until 'Lid AutoOpen=off' or 'Lid
AutoOpen=on' is displayed.
[t] buttons to set 'off' or 'on' .
5.
Use the
off: Lid does not unlock automatically.
on: Lid unlocks automatically.
[START/PULSE] button.
6.
Press the
�� The setting is stored.
'Store Settings...' is displayed briefly.
'-> Settings' is then displayed.
[STOP/OPEN] button once to exit the '-> Settings' menu
7.
Press the
or
[STOP/OPEN] button twice to exit the '*MACHINE MENU*' .
Press the
Rev.: 09 / 01.2024
[SELECT] button.
[SELECT] button.
AB1800en
Publicité
