ig ep
48
To check the preset date and time
Press the DATE or TIME SET button in the
recording pause mode. When the same button is
pressed again, the indication goes off.
To readjust an incorrect date or time
Set the unit to date/time setting mode and press
the NEXT button repeatedly until the incorrect
digit blinks. Correct it with the + button and
press the NEXT button. After adjusting the
minute digits, press the NEXT button at the
same tiine with an anounced time signal.
To Record
the Date or Time MJ >:
During camera recording or in recording pause
mode, press the DATE or TIME SET button to
display the date or time on the viewfinder
screen.
The date or time being displayed will be
recorded together with the picture.
To stop recording the date or time
Press the DATE or TIME SET button again. The
picture recording will continue.