Télécharger Imprimer la page

Sony Handycam CCD-F30 Mode D'emploi page 72

Publicité

S-1
PaA RATE i
UDIOIVIDEO
Se-
'
OUT PELIS
ON
ve pepe
VMC-710M/720M
A AUDIO/VIDEO
72
- Tape Editing
To edit a home movie tape, you will need
another VCR or another video camera recorder.
To Edit from Another VCR to the CCD-F30
S-1
1 While pressing the small button, set the
POWER switch on the CCD-F30 to VTR.
2 Start playback on another VCR.
3 Start recording on the CCD-F30.
VCR
$2
To Edit from the CCD-F30 to Another
1 While pressing the small button, set the
POWER switch on the CCD-F30 to VTR and
turn on the other VCR.
2 Slide the EDIT switch on the CCD-F30 to
EDIT.
3 Set the input selector on the VCR to LINE.
4 Press the fI button on the CCD-F30 during
playback at the point where you want to start
recording.
5 Press the record button on the other VCR,
pressing the 11 button.
6 Release the fi buttons on both units.
Recording will start.
When tne VCR to be used is a stereo type, use
the VMC-910MS/920MS connecting cord.
After editing, turn off both units and be sure to
slide the EDIT switch to the upper position.
To cut off an unnecessary portion
Press the 14 button on the recorder at the beginning of the
unnecessary portion.
Release it where you want to resume recording.
Function of the EDIT switch
Slide this switch down whenever you edit tapes. Signal toss
that results from tape-to-tape transfer will be reduced,
achieving more accurate signal transfer.
When recording or playing back normally, keep this switch
in the upper position.
A
ie ES a

Publicité

loading