Publicité
Using the NP-22 battery pack
A fully-charged NP-22 battery pack can operate this unit for
approximately 60 minutes. For using the NP-22, an optional
NPA:22 battery adaptor is necessary.
Optional Accessories for Charging
* AC-V55 AC power adaptor
Two battery packs can be charged simultaneously.
+ BCA-70 or BCA-80 battery charge adaptor, ACP-88 AC
pack and NPA:55 battery adaptor
For charging, insert an NP-55 into the NPA-55.
House Current — Using AC Power Adaptor:
To operate this recorder on house current, use
the supplied AC power adaptor or optional AC-
V55 AC power adaptor.
For details, please refer to the instruction
manual on the AC power adaptor.
To remove the connecting plate for the AC
power adaptor from the video camera recorder
While pressing the BATT EJECT knob on the
recorder, slide and pull out the connecting plate.
Use the DCC-16AW car battery cord and the AC-
V55 AC power adaptor.
1 Insert the connecting cord supplied with the
AC-V55 into the DC OUT jack on the AC-V55.
2 Align the right side of the connecting plate
with the white line on the recorder, and while
pressing the connecting plate, slide it to the
right.
3 Connect the DCC-16AW car battery cord to
the DC IN jack on the AC-V55 and to the
cigarette lighter socket of a car (12 V or 24 V).
4 Press the POWER switch on the AC-V55.
RS
(io cae
E
EREE
After using, press the POWER switch on the
adaptor again.
To remove the connecting plate from the video
camera recorder
While pressing the BATT EJECT knob on the
recorder, slide and puil out the connecting plate.
The optiona! DCP-55 DC pack (supplied with a
car battery cord) can also be used to operate
this recorder on a 12V or 24V car battery.
16
Publicité
