Easy Camera Recording
_with Automatic Adjustment ..
How to Record
1 While pressing the small button, set the
POWER switch to CAMERA.
insert the cassette.
Set the FOCUS switch to AUTO.
Slide the STANDBY switch up.
The unit will enter the recording pause mode.
5
Press the START/STOP button.
Recording will start.
N
F-2
Aau
Cu
i
Check on the viewfinder screen
STBY: Displayed during recording pause mode.
REC: Displayed during recording.
To stop recording
Press the START/STOP button again.
The unit will enter the recording pause mode.
Avoid rough handling or mechanical shock to the unit. A
smooth transition between scenes may not be made.
To check the last portion of the previous
recording
1 Set the recorder in recording pause mode by
pressing the START/STOP button.
2 Press the — EDITSEARCH button
momentarily.
The last few seconds of the recorded portion are rewound
and then the recorded picture is monitored on the viewfinder
screen. The unit then enters the recording pause mode.
If the picture has not been recorded
The video head may be contaminated. Clean the
heads using the Sony V8-25CL video head
cleaning cassette.
After using
Slide the STANDBY switch down and set the
A
STBY
POWER switch to OFF. (You need not press the
STANDBY
e CA)
center button when setting the switch to OFF.)
REC
5
START/STOP +
24
sat
renege
Ro
ore