Publicité
To connect the VCR without input selector
|
AUDIO OUT
RFU OC OUT
VIDEO OUT
The RFU-89UCA RFU adaptor is required.
Connections
1 Connect the equipment as shown in the
illustration.
2 Select the channel selector of the RFU-89UCA
to either VHF channel 3 CH or 4 CH which is
not active in your area.
:
3 Set the selector switch on the antenna
oe
selector as follows:
#4"
AUDIO!
A VIDEO
419
REY BGUCA
RTS
En
t
AFAN
For viewing a playback picture or a picture
being recorded on the CCD-F30 > VTR
For viewing TV programs > ANT
TV program recording
1 Turn on the VCR and TV.
2 While pressing the small button, set the
POWER switch on the CCD-F30 to VTR.
3 Set the selector switch on the antenna
selector to ANT and select the channel for
the VCR on the TV.
4 Select the TV channel to be recorded on the
VCR.
5 Insert a cassette into the CCD-F30 and slide
the @ REC switch.
Recording will start.
Playback
1 Turn on the TV.
2 While pressing the small button, set the
POWER switch on the CCD-F30 to VTR.
3 Set the selector switch on the antenna
selector to VTR and select the channel for the
VCR on the TV.
4 Insert a cassette into the CCD-F30 and press
the <
button. Playback will start.
To view another TV program while recording
Set the TV/VTR
select button on the VCR to TV and the
selector switch on the antenna selector to ANT. Select the
desired program on the TV.
62
Publicité
