Publicité
Use of the 'Tape Counter.
. To Index the Whole Tape
Press the RESET button at the beginning of the
tape so that the counter shows "0:00:00". By
noting the counter reading at a particular point,
you can easily find that point later by referring to
the tape counter.
Notes
e The counter reading and the point of the tape may not
correspond exactly.
e The counter also operates for a blank, unrecorded portion
of a tape.
© There will be a time lag of several seconds on the counter
reading after repeated fast-forward and rewind operations
or after playing back in slow mode for a long time.
To Return to a Pre-registered
Point 4
1 During recording or playback, press the
RESET button at the point you later want to
locate.
f
2 Press the m button when the recording or
playback has finished.
3 Press the ZERO MEM button. The "ZERO
MEM" indicator will blink in the display
window.
4 Press the ®
or << button.
The tape will be rewound or sent forward and
stop automatically when the counter reaches
approximately zero.
Notes
e The ZERO MEM button does not function during recording
or playback mode.
+ Be sure to press the ZERO MEM button when the tape is
stopped.
¢ The ZERO MEM mode is cancelled automatically once the
tape is rewound or sent forward to zero.
70
Publicité
