Kärcher KM 120/250 R LPG Mode D'emploi page 31

Clean the centrifugal separator
1 Wing nut
2 Centrifugal separator
 Unscrew the wing nut from the centrifu-
gal separator.
 Clean the centrifugal separator.
Replacing fuses
1 Lock nut
2 Cover fuse box
 Unscrew the knurled nut.
 Open the cover on the fuse box.
 Check the fuses.
 Replace defective fuses.
Note: Only use fuses with identical
safety ratings.
Note: The fuse FU 01 is located in the en-
gine compartment.
1 Fuse FU 01 (main fuse)
FU 01* Main fuse
FU 02 Horn
Suction blower
FU 03 Multifunction display
FU 04 Beacon lamp
FU 05 Motor control unit
FU 06 Driver cabin (optional)
Wiper
FU 07 LPG filling level display 5 A
FU 08 Starter
FU 09 Left lighting
FU 10 Right lighting
FU 11 Working light
FU 12 Vibrator system
FU 13 LPG valve
Backup signal
* These fuses may only be changed by
Customer Service, as it is necessary to
check the device for potential faults.
13
-
EN
60 A
20 A
3 A
5 A
10 A
10 A
10 A
7,5 A
7,5 A
10 A
25 A
7,5 A
31