SICE S 100 PL Manuel D'instructions page 79

- Mount the clamp in the space created by
the bead breaker disc (fig. 28).
- Spin the wheel (pedal 15) to mount the
bead until the clamp is close to the tool.
- For large (over 19") or particularly difficult
wheels, a second clamp may be useful.
- Apply further pressure to the tyre (control
21) and move the tool head to its rest
position (control 13).
- Spin the wheel again (pedal 15) until the
clamp is close to the bead breaker disc
and remove the clamp (E).
- Once mounting is complete, raise the bead
breaker disc (control 21).
User Manual S 100 PL
28
position
- For inflation, see "INFLATION" section
table (fig. 30)
B
D
- Loosen the device by turning the handles
1 anticlockwise (A).
- Press the retainers 2 and move the centring
29
cone away from the rim by hand (B).
29a
A
30
-
C
79