SICE S 100 PL Manuel D'instructions page 72

- Place the wheel on the lifter OPTIONAL
ACCESSORY SUPPLIED ON REQUEST
- Lift the wheel operating on pedal 29
OPTIONAL ACCESSORY SUPPLIED ON
REQUEST
- Manually lay the wheel onto the turntable
(8) and lower the lifter by operating on
pedal 29.
- When positioning the wheel on the turnta-
ble, also take care to centre the movable
centring pin, placed radially on the turn-
table, in one of the fixing bolt holes.
29
8
(fig. 15)
- Fit the clamping device into the drop
centre of the wheel (A).
- Turn the device for correct engagement
with the turntable (B).
- By hand, move the centring cone into po-
sition on the rim by moving the retainers
1 (C).
- Tighten the clamping device by turning
the handles 2 clockwise (D).
72
14a
- Operate the valve and fully deflate the
tyre.
A
B
C
D
15
User Manual S 100 PL