SICE S 100 PL Manuel D'instructions page 66

SPECIFIED CONDITIONS OF
USE
The S 100 PL tyre changer has been designed
exclusively for mounting and demounting tyres,
using the tools the machines are equipped with,
following the instructions in this manual.
WARNING
Any other operations carried out on the machine
are considered as improper use and shall be
construed as negligence.
These machines are equipped with an inflation
system independent from any other function
described above. Take great care when using it
(read the INFLATION chapter).
WARNING
You are strongly advised not to use equipment or
tools not originally manufactured by the builder.
The operator's position during the different
operating stages is shown in fig. 9.
A
WARNING
Keep hands well away from machine moving
parts.
WARNING
To stop the machine in an emergency:
66
- disconnect the power supply plug;
- isolate the compressed air supply network by
disconnecting the (quick-coupling) shut-off
valve (fig. 6).
MAIN OPERATING PARTS
WARNING
Get to know your machine: the best way
to prevent accidents and obtain top per-
formance is to get to know exactly how it
works. Learn the function and location of
all the controls. Check carefully that each of
the controls operates properly. To avoid any
risk of accidents and injuries, the machine
must be installed and operated correctly
and serviced regularly.
The machine main operating parts are
shown in fig. 10.
1 Body
2 Centring handle (device for clamping the
wheel to the turntable).
3 Movable head for tyre mounting/de-
mounting.
4 Tilting column.
5 Demounting tool control cylinder.
6a Cylinder for movable head descent.
7 Console.
8 Wheel resting and centring unit.
9 Clamping control handle.
10 Bead breaking unit.
11 Bead breaker disc.
12 Grease tank.
13 Tilting column pedal.
14 Inflation pedal.
15 Rotation pedal.
9
17 Pressure gauge for reading inflation
pressure.
18 Filter Regulator + Lubricator Unit (regu-
lates pressure, filters, removes humidity
of and lubricates the compressed air
supplied).
19 Data plate.
20 Deflation push-button
21 Control valve for upper bead breaking
arm ascent descent.
User Manual S 100 PL