SICE S 100 PL Manuel D'instructions page 55

information in this manual.
- Have a thorough knowledge of the capa-
bilities of this machine.
- Keep unauthorised persons well clear of
the area of operation.
- Make sure the machine has been installed
in compliance with all relevant regulations
and legislation.
- Make sure that all machine operators are
suitably trained, that they are capable of
using the equipment correctly and that
they are adequately supervised.
- Never leave nuts, bolts, tools or any other
equipment on the tyre changer as they may
become entrapped between moving parts.
- Not touch power lines or the inside of
electric motors or any other electrical
equipment before making sure the power
supply has been disconnected.
- Read this manual carefully and learn how
to use the machine correctly and safely.
- Always keep this user and maintenance
manual in an easily accessible place and
consult it whenever necessary.
WARNING
Do not remove or deface the Danger,
Warning or Instruction decals. Replace any
missing or illegible decals. If one or more
decals have been detached or damaged,
replacements can be obtained from your
nearest dealer.
- When using and servicing the machine,
observe the standardised industrial ac-
cident prevention regulations for high
voltages.
- Any unauthorised alterations or changes
made to the machine shall automatically
release the manufacturer from any liability
for damage or accidents attributable to
such modifications. Specifically, tampering
with or removing the safety devices is a
breach of the regulations for Safety in the
workplace.
- User must wear personal protective
equipment such as gloves, safety footwear
and goggles.
User Manual S 100 PL
WARNING
When operating or servicing the equipment,
tie back long hair and do not wear loose-
fitting clothes, ties, necklaces, rings or wri-
stwatches which could become entrapped
by moving parts.
DESCRIPTION OF S 100 PL
TYRE CHANGER
The S 100 PL model is a universal electro-
pneumatic tyre changer, to be used with
integral wheels with drop centre featuring
weights and dimensions as described in
the technical data section.
It is designed to work effectively on:
- Conventional wheels;
- Reverse rim wheels or wheels without
central hole - (use optional kit);
- Run-flat tyres with reinforced sidewalls*.
* WARNING: There are specifically studied
procedures for this type of wheels.
NB: It may be difficult and sometimes impossible to
clamp and/or demount wheels of Vintage cars (cars
out of production for over 30 years), some types of
rally wheels and non-standardised street wheels.
The machine is solidly constructed. It ope-
rates with the wheel in a horizontal position
for both bead breaking and demounting/
mounting operations.
All machine movements are controlled by
the operator by means of a pedal in a pedal
board and manual controls on the console.
The S 100 PL tyre changer can be used to
easily break, demount and mount any type
of the above tyres.
In any stage, the S 100 PL tyre changer ope-
rates with a clamped and perfectly centred
horizontal wheel on the turntable.
Wheel loading and unloading operations
are simplified by an ergonomic wheel lift
(optional kit) which minimises the operator
effort required.
The main advantage of the S 100 PL model
is that it does not have a bead lifter lever.
55