Energy Yield; Fan; Arc Detection - Fronius Symo 10.0-3 208-240 Instructions De Service

Since contrast depends on temperature, it may be necessary to adjust the "Contrast"
menu item when environmental conditions change.
Illumination
Initial setting for display illumination
The "Illumination" menu item only applies to the display background illumination.
Setting range
Factory setting

Energy Yield

Setting
-
-
Setting range
Currency
Currency setting
Setting range
Feed-in tariff
Charge rate setting for the energy fed into the grid
Setting range
Factory setting

Fan

for checking the fan functionality
Setting range
-
-
-

Arc Detection

for checking arc detection/interruption
Setting range
AUTO / ON / OFF
AUTO
AUTO: The display illumination is activated by pressing any key. If no key is pressed
for 2 minutes, the display backlight goes out.
ON: The display illumination will be permanently on when the inverter is active.
OFF: The display illumination will be permanently off.
the currency
the feed-in tariff
Currency/Feed-in tariff
3-digit, A-Z
2-digit, 3 decimal places
(depends on the country setup)
Test fan 1 / Test fan 2 (depends on device)
Use the "Up" and "Down" keys to select the desired fan
Press the "Enter" key to start testing the selected fan
The fan runs until the menu is exited by pressing the "Esc" key
ArcDetector Status/Start Self-test
39